background image

 

 File 

Doc. No. 

             Date 

 Version 

Page 

DBHB-20 

5700 9004 055 

Aug 05 

 1.0 

7/12 

 

 

 

Next Generation 
Signal Enhancement 

 
5.0 

System Design and Setup 

  

The DBHB-20 is designed to provide optimal coverage for areas of 500 Sq 
Meters (5,000 sq. ft) to 1,000 Sq Meters (10,000 sq. ft). However, performance 
also depends on the amount of in-building shadowing, and the available forward 
signal level at the donor antenna. Typical coverage is usually planned for 
relatively small areas such as large conference room or several adjacent rooms 
in smaller office areas. Indoor coverage varies greatly due to the nature of 
various building construction techniques and materials.  

 

The system design is quite simple & straightforward. The signal from the base 
station (of the selected Operator) is picked up, preferably on the rooftop. 

 

The built in receive signal level indicator in DBHB-20 booster helps in aligning the 
donor antenna towards the selected base station & it always shows the received 
signal level from the base station. It is imperative to monitor the received signal 
level from the base station, also called downlink signal. Downlink signal may 
change if some high building, trees or any other obstruction comes in the way of 
line of site (LOS) between the BTS & the Donor antenna. This may reduce the 
downlink received signal level  & will result in poor service. 

 

6.0 

Installing the DBHB-20 

 

6.1 Pre-installation 

considerations 

 

1. 

Once the expected coverage area is determined, identify the installation 
location for the donor antenna and DBHB-20 booster. Ensure that the 
donor antenna has a direct line-of-site to the service provider’s base 
station.  

 

2. 

DBHB-20 installation site location criterion 

 

i.  A cool, dry location, away from other heat generating appliances or 

equipment. 

ii. 

Accessibility to electric power point. 

iii. 

Flat, structural mounting surface. 

iv.  Accommodation for the indoor antenna providing line-of-site coverage to 

as much of the coverage area as possible. 

 

6.2 Installation 

Tools 

 

You will only need the standard wrenches/hammer/screwdrivers/pliers set 
for installing the DBHB-20 booster and donor antenna. 

 
 

 

Summary of Contents for DBHB-20














Reviews: