SHX SHXTH2000GF, Manual

Page: 20 / 92

20
Operation
1 Make sure the power supply is the same as rated, PLUG the unit into a plug
socket.
2 PRESS the power button on the right side of heater
3 TURN ON the heater by remote control, or off the heater
4 DOWN & UP BUTTON, setting the power level
5. Troubleshooting
1.
If heater will not power cord is plugged into an electrical outlet, if not, plug in.
2.
Check if electricity to the main fuse is working
3.
Check to see it the On and off switch is in the ON position
6. Cleaning and maintenance
Regular and careful cleaning helps your infrared heater operate efficiently for many
trouble free years. To clean your heater follow steps below
1.
Unplug the power cord for your safety before cleaning your appliance.
2.
Make sure the heater is cool before continuing
3.
To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth.
You may use a mild detergent if necessary. After cleaning, dry the unit with a soft
cloth. (CAUTION: DO NOT let liquids enter the heater)
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
5.
DO NOT immerse the heater in water
6.
Wait until the heater is completely dry before use.
Storage:
Store the heater in a cool, dry location when not in use to prevent dust and dirt
build up. Use packaging carton to store.