Seite
23
von
32
3. Insert the four rails fitting into the holes in the wall.
4. Now hold the panel against the four rail fittings
matching the four holes on the device.
5. Now mount the panel against the wall, by screwing
the screws trough the panel into the rails.
6. Put the caps onto the fasten bolts.It is
recommended to use some glue to stick the caps
onto the bolts steadily.
Note: If you want to disassemble the device, simply remove the covers, unscrew the screws with a
screwdriver and remove the device from the wall.
Make sure that you mount the device at least 20 cm above the floor.
