Seite
18
von
24
2. FILL THE WATERTANK
1. Press in the tabs on the cover and the remove the cover.
2. Remove the water tank and turn it upside down.
3. Unscrew the valve cover turning it anticlockwise.
4. Fill up the water tank and make sure that you use clean
water and that the water is not warmer than 40°C.
5. Make sure not to overfill the water tank.
6. Screw the valve cover back onto the water tank turning it
clockwise.
7. Put the water tank back in and put the cover back on.
Make sure that the device is not connected to the mains when you fill the water tank.
Only fill the tank with water. You must not add any chemicals, fragrance oils, other
fragrances or other liquids to the water, as these could clog the gland and attack the
plastic!
Use only cold or lukewarm water in the water tank. The water must not be warmer than
40 ° C.
3. DESCRIPTION OF THE CONTROL PANEL AND THE REMOTE CONTROL
You can either use the remote control or use the buttons on the control panel of the device to
operate it.
When operating with the remote control, the remote must be pointed at the sensor on the
device, that proper function is guaranteed.
Control Panel
Remote Control
