163
COMMISSIONING
1. ASSEMBLY AND INSTALLATION
1. Remove the tower heater from the packaging and remove all
packaging materials.
2. Check the appliance for possible damage.
3. Unwind the power cable and check it for damage too.
4. Slide the two base
halves together as
illustrated.
5. Now place the base
on the underside of
the tower heater and
while doing so pull
the cable through the
middle of the base.
6. Now use the supplied
fixing
screws
to
screw the base and
tower
together
in
order to fasten the
tower heater.
7. Finally, guide the power cable on the underside of the base through
the opening provided on the side of the base to the outside.
8. This will ensure the stable footing of the tower heater and provide
strain relief for the power cable.
Summary of Contents for SHX21PTC2000KE
Page 9: ...9 BESCHREIBUNG DES GERÄTES Bedienfeld Display Luftauslass Display mit Kaminfeuer Standfuß ...
Page 86: ...86 BESKRIVNING AV APPARATEN Kontrollpanel Display Luftutsläpp Display med brasa Fot ...
Page 105: ...105 POPIS PŘÍSTROJE Ovládací panel Displej výstup vzduchu Displej s krbovým plamenem Stojan ...