Seite
18
von
23
3. DESCRIPTION OF THE CONTROL PANEL AND THE REMOTE CONTROL
You can either use the remote control or use the buttons on the control panel of the device to
operate it.
When operating with the remote control, the remote must be pointed at the sensor on the
device, that proper function is guaranteed.
Control panel
Remote control
8. Power ON indicator
9. Heating mode
(LOW/ HIGH/
AUTO)
10. LCD-Display
11. Temperature
indicator
12. Humidity
13. Mist indicator
14. Water tank indicator
F. ON/OFF
G. Timer
H. Heating mode
I. Set temperature
„+“ & „-“
J. Mist & Flame
F. ON/OFF
G. Timer
H. Heating mode
I. Set temperature
„+“ & „-“
J. Mist & Flame
4. PREPAIRING THE REMOTE CONTROL
Please follow the instructions below:
To operate the remote control for the first time, please pull the plastic protection out of the
battery compartment.
To change the battery please follow the instructions bellow:
1. turn the battery cover and lift it up. Remove the old battery and then insert a new one:
2.
Always make sure that the “+” polarity mark is facing up.
