
47
English
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS Supported
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen or DPMS Supported.
HDD Power Down
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disable.
Ø
The choice: Disabled or 1 Min ~ 15 Min.
HDD Down In Suspend
The item allows you to enabled or disabled the HDD Down In Suspend.
Ø
The choice: Enabled or Disabled.
Soft-Off By PBTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has " hung".
Ø
The choice: Delay 4 Sec or Instant-Off.
WOL(PME#) From Soft-Off
If this item sets to Enable, the system power will be turned on when the
LAN port receives an incoming signal. You have to connect the fax/mo-
dem to the mainboard Wake On LAN connector for this feature to work.
Ø
The choice: Enabled or Disabled.
WOR(RI#) From Soft-Off
If this item is enable, it allows the system to resume from a software power
down or power-saving mode whenever there is an incoming call to an
installed fax/modem. You have to connector the fax/modem to the
mainboard.
Ø
The choice: Enabled or Disabled.
Power-On by Alarm
When set to Enabled, the following three fields become available and
you can set the month, date (day of the month), hour, minute and second
to turn on your system.
Ø
The choice: Enabled or Disabled.