7
English
<
1.5.2 Jumper Settings
Pin Assignments (JP7):
1=HDLED_PU
2=GLEDA
3=HDLED
4=GLEDB
5=Reset_SW
6=Power_SW
7=GND
8=GND
9=NC
10=KEY
@
Front Panel Connector (JP7)
Header JP7 can be used to provide operation status signals to the front daughterboard.
Note that this is an alternative header to the 50pin streamline header that also con-
nects the motherboard to the front daughterboard.
@
Fan Connectors (FAN1/FAN2/FAN3/FAN4)
The mainboard provides four onboard 12V cooling fan power connectors to support
CPU_In (FAN1), CPU_Out (FAN2), System (FAN3), Reserved (FAN4) cooling fans.
Note : Both cable wiring and type of plug may vary depending on the fan
maker. Keep in mind that the red wire must always be connected to
the +12V header and the black wire to the ground (GND) header.
1
PWM_CTRL
SPEED_SENSE
+12V
GNDt
9
7
5
3
1
10
8
6
4
2
JP7
Summary of Contents for XPC SD31P
Page 1: ...XPC User Guide For the SD31P ...
Page 79: ...SD31P ...
