Page 9
STEP 6
ATTACHING ACCESSORIES
ITEMS
REQUIRED
CARRIAGE
LOCKDOWN
SLIDER
HYPEREXTEN-
SION STOP
1. Insert Carriage Lockdown Slider. First, loosen the knob by turning counterclockwise so that
the disk separates from the fiberglass. Then insert into the Rail System so that the sticker is
in the upright position. Make sure that the fiberglass slides along the inside of the rail while
the disk and knob slide on the outside of the rail. When the slider is in the desired position,
rotate the knob clockwise until it is securely fastened. (Pic 6.1)
2. Insert the Hyperextension Stop into the rail system. (Pic 6.2)
6.1
6.2
