- 33 -
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at
slower speed while all other devices still operate at full speed.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk drive and the
video would be shut off while all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU
will be shut off.
HDD Power Down
This item defines the continuous HDD idle time before the HDD enters power saving
mode (motor off). The options are from 1 min to 15 min and
Disabled
.
Throttle Duty Cycle
This item
determines the duty cycle for the clock control thermal throttling mode.
The duty cycle indicates the percentage of time while in the thermal throttle mode.
The settings between 12.5% and 87.5%.
PCI/VGA Act-Monitor
If this item is set to Enabled, the VGA activity event will be monitored to reload
global timer.
Soft-Off by PWR-BTTN
The setting of
Instant-Off
allows the ATX switch to function as a normal system
power off button when pressed for less than 4 seconds. The setting of
Delay 4 Sec.
allows the button to have a dual function where to press the button for less than 4
seconds will place the system in suspend mode, and pressing the button for more
than 4 seconds will shut place the system off.
CPUFAN OFF In Suspend
This item determineCPU fan status when the system enters suspend mode.
The options Enabled and Disabled.
PowerOn by Ring
This item determine the system will resume by activating of modem ring.
Power On on PCI card
This item determine the system will power-on by activity of PCI card which with
"PME" signal.
Resume by Alarm
This item determine the system will resume by activity of R.T.C. If enabled this
feature and enter resume date and time. When date and time expire, system will
power-on itself from power off.
