- 12 -
Clear CMOS - JP11
MB11/MZ11 mainboard supports jumper
JP11
for
discharging mainboard's CMOS memory.
This jumper can clear the CMOS data stored in
the I/O chip. To clear the CMOS data please
follow listed steps:
1) Turn off the PC,
2) Remove mini jumper from JP11 pin 1-2,
3) Insert mini jumper to JP11 pin 2-3 for a
brief while,
4) Remove mini jumper from JP11 in 2-3,
5) Reinsert mini jumper to JP11 pin 1-2,
6) Turn on the PC.
K/B & PS/2 Mouse Power-On JP1
Keyboard &
PS/2 Mouse
Power-On
Disabled
Keyboard &
PS/2 Mouse
Power-On
Enabled
PS/2 Mouse
Power-On
Enabled
Keyboard
Power-On
Enabled
Table 3-3
K/B & PS/2 Mouse Power-On Setting - JP1
MB11/MZ11 mainboard provides an optional power-on
function by stroke any key (or hot-key) on keyboard
or double click on PS/2 mouse.
Note: Power-on by serial mouse is not supported
JP1 is the jumper used to set the functions of keyboard
& PS/2 mouse power-on Enabled or Disabled.
When you enabled K/B & PS/2 Mouse Power-ON
function, you also have to set the proper item on
POWER ON function
category of
Integrated
Peripherals
of BIOS setup.
Figure 3-4
Figure 3-5
Wake-On-LAN Setting - JP26
JP26 Close (On)
Wake-On-LAN Function Enabled
JP26 Open (Off)
Wake-On-LAN Function Disabled
