- 36 -
E1
F
Other Connectors
ATX Power Supply Connectors (ATX1 and ATX2)
This motherboard uses 20-pin (ATX2) Pentium 4 standard ATX power
header, and one (ATX1 with 2X2-pin) +12V PC ATX power supply header.
Please make sure you plug in the right direction.
You can choice ATX1 power supply header to support CPU power.
Note 1:
The ATX power connector is directional and will not go in unless the guides
match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to ensure a
solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power and
at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed processor
installed.
P4 ATX Power supply headers
ATX2
ATX1
AT
X2
ATX1
