- 29 -
Set Keyboard & PS/2 Mouse Power-On (J1)
ME17/ME18 mainboard provides an easy power-on by keyboard and PS/2
mouse.
Note:
When you enable Keyboard Power-On, you also need to configure
the proper hot-key combination <Ctrl> + < function key F1 ~
F12 > in BIOS setup program.
To Power on the system by keyboard, simply strike the proper hot-key. (A
hot-key is the combination of <Ctrl> + <configured function key F1 ~
F12>)
To power on the system by PS/2 mouse, you only need to double-click with
the mouse. (Note that power-on by serial mouse is not supported)
To enable/disable either or both keyboard and PS/2 mouse power-on func-
tions, follow the steps outlined below:
J1 1-3, 4-6 (default)
Step 1.
Adjust the jumper group J1 as shown in the following table.
Step 2.
Set the Power On field to the proper value (Hot-key or PS/2
Mouse) in Integrated Peripherals menu of BIOS setup.
1
K/B & PS/2 Mouse Power-On - J1
Keyboard & PS/2
Mouse Power-On
Disabled
Keyboard Power-On
Enabled
PS/2 Mouse
Power-On Enabled
