- 57 -
CPU L2 Cache ECC Checking
When you select Enabled, memory checking is enabled when the
CPU internal L2 cache contains ECC SRAMs.
Ø
The choice: Enabled or Disabled.
Quick Power On Self Test
This item speeds up Power-On Self Test (POST) after you power on the
computer. If it is set to enabled, BIOS will shorten or skip some check
items during POST.
Ø
The choice: Enabled, or Disabled.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø
The Choice: Floppy, LS120, HDD-0, SCSI, CDROM, , HDD-1,
HDD-2, HDD-3, ZIP100, LAN, or Disabled.
Boot Other Device
Select Your Boot Device Priority.
Ø
The choice: Enabled or Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive
name assignment.
Ø
The choice: Enabled or Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot-up. Disabling speed boots up.
Ø
The choice: Enabled or Disabled.
Boot Up NumLock Status
Selects power-on state for NumLock.
Ø
The choice: Off or On.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller.
When this controller enabled, the typematic rate and typematic delay
can be selected.
Ø
The choice: Enabled or Disabled.
