- 37 -
F
Internal Peripherals Connectors
Enhanced IDE, IDE RAID (AV40R only), and Floppy
Connectors
The mainboard features two 40-pin dual-channel IDE device connectors
(IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM
and Hard Disk Drives (H.D.D.) and features two 40-pin dual-channel IDE
RAID device connectors (RAID1/RAID2) providing support for up to four IDE
devices, such as Hard Disk Drives (H.D.D.).
This mainboard also includes one 34-pin floppy disk controller (FDD1) to
accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard
comes with one 80-pin ATA
100/66/33
ribbon cable to connect to IDE
(RAID) H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
D1
Note :
1. Please connect system H.D.D. to IDE 1 or RAID1.
2. If you used RAID1 connector, please refer to
IDE
RAID Manual
to setup RAID BIOS program.
Important:
Ribbon cables are directional, therefore, make sure to always
connect with the red cable.
IDE4
IDE3
R AID 2
R AID 1
1
1
ID E1
ID E2
1
1
1
1
FDD1
F DC
