- 35 -
Green LED Connector (GLED)
The Green LED (GLED) indicates that the system is currently in one of the power
saving mode (Doze/Standby/Suspend). When the system resumes to normal
operation mode, the Green LED will go off. Attach a 2-pin Green LED cable to
GREEN LED header.
HDD LED Connector (HDD LED)
Attach the connector cable from the IDE device LED to the 2-pin HDD LED
header.
The HDD LED lights up whenever an IDE device is active.
PWR LED Connector (PWR_LED)
Attach the 3-pin Power-LED connector cable from the housing front-panel to
the PWR LED header on the mainboard. The power LED stays light while the
system is running.
C3
C4
C5
J5
1
RST
PW R_LED
+ -
SPK
GLED
+ -
+ -
EPMI PW R_ON
HDD
LED
J5
1
RST
PW R_LED
+ -
SPK
GLED
+ -
+ -
EPMI PW R_ON
HDD
LED
J5
1
RST
PW R_LED
+ -
SPK
GLED
+ -
+ -
EPMI PW R_ON
HDD
LED
