- 68 -
Init Display First
This item allows you to decide to activate whether PCI Slot or AGP Slot
first.
Ø
The choice: PCI Slot or AGP .
CMedia CMI8738 Audio
This item allows you to select CMI8738 Audio chip to support Audio.
Ø
The choice: Enabled, or Disabled
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode
(most new drives do), select Enabled for automatic detection of the
optimal number of block read/writes per sector the drive can support.
Ø
The choice: Enabled, or Disabled
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on function
enabled or disabled.
Ø
The choice:Hot-KEY, Mouse Click, Any KEY, Button Only, Keyboard
98.
Note USB Keyboard, USB Mouse and Serial Mouse are not
supported to this function.
Hot Key Power ON
Power-on by soft-on/off button and keyboard are available.
Ø
The choice: <Ctrl><F1> to <Ctrl><F12>.
Onboard FDC Controller
This item specifices onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector. Choose the "Disabled" settings if you have a separate
control card.
Ø
The choice: Enabled Disabled.
Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first and second
serial ports.
Ø
The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or
Disabled.
