- 36 -
Green LED Connector (GLED )
The Green LED (GLED) indicates that the system is currently in one of the power
saving mode (Doze/Standby/Suspend). When the system resumes to normal
operation mode, the Green LED will go off. Attach a 2-pin Green LED cable to
GLED header.
HDD LED Connector (HLED)
Attach the connector cable from the IDE device LED to the 2-pin HLED header.
The HDD LED lights up whenever an IDE device is active.
Power LED Connector (PLED)
Attach the 3-pin Power LED connector cable from the housing front panel to
the PLED header on the mainboard. The power LED stays light while the sys-
tem is on.
C5
C4
C3
JP14
G LED
H LED
+
-
+
+
-
-
EPMI
R ST
SPEAKER
PW ON
PLED
KEYLOC K
JP1 4
G LED
H LED
+
-
+
+
-
-
EPMI
R ST
SPEAKER
PW ON
PLED
KEYLOC K
JP14
G LED
H LED
+
-
+
+
-
-
EPMI
R ST
SPEAKER
PW ON
PLED
KEYLOC K
