5
English
2. Looking at the inside of the stealth
drive door, check the alignment of
the drive’s eject button with this
XPC’s drive eject mechanism.
Adjust the internal control rod to
match the position of the optical
drive’s eject button.
3. Fasten the four side screws.
2.4.4 Install an Optical Drive
Control Rod
4. Plug the optical drive cable and
power cable into the optical drive.
Optical Drive Cable
Optical Drive Power Cable
5. If you are not installing more serial
ATA HDDs, place the serial ATA
HDD rack in the chassis and refas-
ten the rack.
. Slide the optical drive into the chassis.
