- 41 -
3.3 System Memory Configuration
The MV43VN mainboard has two 184-pin DIMM banks that allow you to in-
stall from 128MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-
line Memory Module) bank can accommodate 128MB, 256MB, 512MB, and
1GB of PC1600/PC2100/PC2700 compliant 2.5V single or double side DDR
SDRAM modules. DIMM slots are arranged in two banks, each memory bank
made of one bank and providing a 64-bit wide data path.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Note : The total installed memory does not exceed 2GB.
Note : You do not need to set any jumper to configure memory since theBIOS
utility can detect the system memory automatically. You can check the
total system memory value in the BIOS Standard CMOS Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR SDRAM
modules in available DIMM banks. The total system memory is calculated by
simply adding up the memory in all DIMM banks. After upgrade, the new sys-
tem memory value will automatically be computed and displayed in the field
"Standard CMOS Setup" of BIOS setup program.
DIMM Socket
Memory Modules
Module
Quantity
DIMM 1
128MB, 256MB, 512MB, and 1GB 184-pin 2.5V DDR
SDRAM DIMM
x 1
DIMM 2
128MB, 256MB, 512MB, and 1GB 184-pin 2.5V DDR
SDRAM DIMM
x 1
