- 33 -
Extended USB Headers (USB2/USB3)
The headers are used to connect the cable attached to USB connectors
which are mounted on front panel or back panel. But the USB cable is op-
tional at the time of purchase.
Pins Assignment:
1=USBPWR0
2=-YSB_FP_P0- 3=US
4=GROUND
5=EMPTY 6=USBPWR1
7=USB_RP_P1-
8=US 9=GROUND
10=USB_FP_OC0
C7
C8
USB3
USB2
1
2
1
2
AUDIO1
1
2
Two mini jumper must
be setted on pin9-10
and pin5-6, when this
header is not used.
1
2
Front-Oriented Microphone /Line-out Port Header (AUDIO1)
This header allows the user to install auxiliary front-panel1 microphone and
line-out ports for easier access. When frontpanel Microphone and line-out
ports are not used, make sure to place two attached mini jumpers to the right
position shown as below.
Pin assignment:
1. AUD_MIC 2. MIC_BIAS 3. AUD_F_R
4. RESERVED 5. AUD_F_L 6. AUD_GND
7. AUD_VCC 8. AUD_RET_R 9. EMPTY
10. AUD_RET_L
