- 36 -
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
Soft-Off by PWRBTN
The setting of
Instant-Off
allows the ATX switch to function as a normal system power
off button when pressed for less than 4 seconds. The setting of
Delay 4 Sec.
allows the
button to have a dual function where to press the button for less than 4 seconds will place
the system in suspend mode, and pressing the button for more than 4 seconds will shut
place the system off.
CPU Fan In Suspend
This item determineCPU fan status when the system enters suspend mode.
The options Enabled and Disabled.
HDD Power Down
This item defines the continuous HDD idle time before the HDD enters power saving
mode (motor off). The options are from 1 min to 15 min and
Disabled
.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at slower
speed while all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will
be shut off.
** PM Events **
PM events are I/O events whose occurrence can prevent the system from entering a power
saving mode or can awaken the system from such a mode. In effect, the system remains
alert for anything occurs to a device whidch is configured as On, even when the system is
a power down mode.
VGA
When set to On (default), any event occurring at a VGA port will awaken a system which
has been powered down.
LPT & COM
When set to LPT/COM (default), any event occurring at a COM (Serial)/LPT port will
awaken a system which has been powered down.
HDD & FDD
When set to On (default), any event occurring at a hard or floppy drive port will awaken a
system which has been powered down.
DMA/master
When set to On (default), any event occurring to the DMA controller will awaken a
system which has been powerec down.
