- 43 -
Onboard Serial Port 1
This item is used to define onboard serial port 1 to
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3, Auto
or
Disabled
.
Onboard Serial Port 2
This item is used to define onboard serial port 2 to
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3, Auto
or
Disabled
.
UART Mode Select
The main board support IrDA(HPSIR) and Amplitudes Shift Keyed IR(ASKIR) infrared
through COM 2 port. This item specifies onboard Infra Red mode to
IrDA 1.0, ASKIR,
MIR 0.57M, MIR 1.15M, FIR
or
Standard (Disabled).
Note : FIR is not available currently.
RxD, TxD Active
Consult your IR peripheral documentation to select the correct setting of the TxD and
RxD signals.
IR Transmittion delay
This item is used to set IR transmittion delay function Enabled or Disabled.
Onboard Parallel Port
This item specifies onboard parallel port address to
378H, 278H, 3BCH
or
Disabled.
Parallel Port Mode
This item specifies onboard parallel port mode. The options are
SPP
(Standard Parallel
Port),
EPP
(Enhanced Parallel Port),
ECP
(Extended Capabilities Port), and
EPP+ECP.
ECP Mode Use DMA
This item specifies
DMA
(Direct Memory Access) channel when ECP device is in use.
The options are
DMA 1
and
DMA 3
.
This item will not show up when SPP and EPP
printer mode is selected.
EPP Mode Select
This item is used to select EPP port type EPP 1.9 or EPP 1.7.
