- 37 -
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
Soft-Off by PWRBTN
When Enabled, turning the system off with the on/off button places the system in a very
low-power-usage state, with only enough circuitry receiving power to detect power button
activity or Resume by Ring activity.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at slower
speed while all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will
be shut off.
** PM Events **
PM events are I/O events whose occurrence can prevent the system from entering a power
saving mode or can awaken the system from such a mode. In effect, the system remains
alert for anything occurs to a device whidch is configured as
On
, even when the system is
a power down mode.
VGA
When set to
On
(default), any event occurring at a VGA port will awaken a system which
has been powered down.
LPT & COM
When set to
LPT/COM
(default), any event occurring at a COM (Serial)/LPT port will
awaken a system which has been powered down.
HDD & FDD
When set to
On
(default), any event occurring at a hard or floppy drive port will awaken a
system which has been powered down.
DMA/master
When set to On (default), any event occurring to the DMA controller will awaken a
system which has been powered down.
Wake Up On LAN
This item determine the system will resume by activity of LAN. If enabled this feature
system will power-on itself from power off when the activity of LAN.
