- 21 -
CPU, Chassis & AGP cooling
Fan connectors - JP3, JP4,
J10 & J14
The main board provides three onboard 12V
cooling fan power connectors for CPU (JP3 &
JP4), Chassis (J14) and AGP device (J10)
cooling fan. Depending on the fan maker, the
wiring and plug may be different. The red
wire should be connected to +12V and black
wire should be connected to ground (GND)
Wake-On-LAN Connector - J12
Attach a 3-pin connector from the LAN card
which supports the Wake-On-LAN (WOL)
function. This function lets users wake up the
connected system through the LAN card.
Enhanced IDE and Floppy
connectors
The main board shipped with one 40-pin
ribbon cable for IDE H.D.D , one 34-pin
ribbon cable for F.D.D. Ribbon cables should
always be connected with the red stripe on the
Pin 1 side of the connector.
CD Audio Connectors
SJ1: 1 = Ground
2 = Right Channel
(CD_In)
3 = Ground
4 = Left Channel
(CD_In)
SJ2: 1 = Left Channel
(CD_In)
2 = Ground
3 = Ground
4 = Right Channel
(CD_In)
SJ3: 1 = Left Channel
(AUX)
2 = Ground
3 = Ground
4 = Right Channel
(AUX)
Figure 2-31
Figure 2-32
