- 20 -
CPU, Chassis & AGP cooling Fan
connectors - JP29, JP28, J43 &
J47
The main board provides three onboard 12V
cooling fan power connectors for CPU (JP28 &
JP29), Chassis (J43) and AGP device (J47)
cooling fan. Depending on the fan maker, the
wiring and plug may be different. The red wire
should be connected to +12V and black wire
should be connected to ground (GND)
Wake-On-LAN Connector - J45
Attach a 3-pin connector from the LAN card
which supports the Wake-On-LAN (WOL)
function. This function lets users wake up the
connected system through the LAN card.
Enhanced IDE and Floppy
connectors
The main board shipped with one 40-pin ribbon
cable for IDE H.D.D , one 34-pin ribbon cable for
F.D.D. Ribbon cables should always be connected
with the red stripe on the Pin 1 side of the connec-
tor.
Figure 2-31
Figure 2-30