- 18 -
Connectors
Front Panel Connectors
Hardware Reset Connector - J32
Attach 2-pin hardware reset switch to it. Closing the
reset switch restarts the system.
PWR LED Connector - J27
Power LED connector is a 3-pin connector for
attached to the case's Power LED.
KeyLock Connector - J27
KeyLock connector is a 2-pin connector for a lock
that may be installed on the system case for enabling
or disabling the keyboard.
Speaker Connector - JP24
PC speaker connector may attach a 4-pin PC speaker
cable from the case to this connector.
HDD LED Connector - S3
Attach a 2-pin IDE drive LED cable to this connector. The LED lights when an IDE device is active.
ATX Power On/Off Switch Connector - S1
Attach a 2-pin momentary type switch to this connector for turning on or off your ATX power supply.
GLED Connector - J48
Attach a 20-pin Green LED cable to it. The Green LED lights when the sytem get into power saving
mode. The Green LED off when the system resume back to normal mode.
EPMI Connector - J42
Hardware System Management Interface connector may attach a 2-pin momentary switch to it. When
push it will force system get into power saving mode, and the sytem will resume when switch is
pushed again.
Figure 2-26