User's Manual 10
Flash EEPROM Jumper - JP1
HOT-617 mainboard supports two types of flash EEPROM, 5 volt and 12 volt. By
setting up jumper JP1, you can update both types of flash EEPROM with new system
BIOS files as they come available.
Normal, JP1 was set by factory, the user need not to change.
JP1 Pin 2-3 Close for 5V
JP1 Pin 1-2 Close for 12V
BIOS UPGRADES
Flash memory makes distributing BIOS upgrades easy. A new version of the BIOS can
be installed from a diskette.
Please note the following when making the BIOS updates.
** Flash utility can't work under protected/virtual mode. Memory manager
like
QEMM.386
,
EMM386
should not be loaded. (or Simply bypass all
config.sys
and
autoexec.bat
on system boot up.
** Flash utility supports both 5V and 12V Flash EEPROM.
