25
DRAM Auto Configuration
This item auto configures the item of DRAM Timing Control.
DRAM Timing
Control
will be set to “Auto” when this item set to
60 ns
or
70 ns
.
DRAM Timing
Control
may be set to “Normal”, “Medium”, “Fast” or “Turbo” when this item set to
Disabled.
DRAM Timing Control
This item set the DRAM Read/Write timings that the system uses. The options are
“Normal”, “Medium”, “Fast”, “Turbo” or “Disabled”.
SDRAM Cycle Length
This field sets the CAS latency timing.
The Choice: 2, 3.
SDRAM Bank Interleave
This item allows you to set how many banks of SDRAM support in your mainboard.
The Choice: 2 Bank, 4 Bank, Disabled.
Sustained 3T Write
This item allow you to enable or disable direct map write back / write through second-
ary cache.
The Choice: Enabled, Disabled.
Chipset Features Setup
