16-Bit Sound Pro
5
Installation Guide
Hardware Installation
1
Power down your computer, remove the cover and find an empty 16-
bit expansion slot.
2
For CD-ROM Installation
: Refer to page 12 CD-ROM Configuration.
3
Install the HOT-235 into an open slot and secure it.
4
Connect a pair of speakers to the Speaker-Out connector. Refer to the
diagram listed on page 7 for connecting other external devices.
5
Replace your computer's cover. Hardware installation is complete.
DOS/Windows' Drivers Installation
1
Insert the HOT-235 Installation disk in your floppy drive, log onto
that drive and type
INSTALL
at the DOS prompt.
2
The HOT-235 menu-driven
installation program will ap-
pear. Follow the on-screen
instructions to configure the
HOT-235 for your system.
3
After setup, you should test
the HOT-235 by clicking on
the Sound Test button. If
there are any problems,
check your I/O, IRQ and
DMA settings.
4
Once you are satisfied with your settings, click on the
Accept
button
at the bottom of your screen. The HOT-235 Installation program will
finish setting up your system by modifying your
AUTOEXEC.BAT
and
CONFIG.SYS
files and copy the appropriate drivers to your sys-
tem.
Summary of Contents for HOT-235
Page 27: ...16 Bit 3D Stereo Sound Card...
