Shuttle HOT-235, Manual

Page: 16 / 27

16-Bit Sound Pro 1 6
WINDOWS 3.1 APPLICATION
The OPTi82C930 Installation program will install applications for use in
Windows 3.1. The first time you run Windows 3.1 after running the In-
stall program you will be asked if you want to create a Program Group for
the OPTi 82C930 applications. Answer "Yes" to this question to install
the applications.
The current applications are shown right.
Be sure to check the README.TXT file for
information on any applications that may
have been installed since this manual was
published.
Audio Mixer
The Audio Mixer pallet lets you adjust the volume settings for each of the
individual audio sources that the 82C930 supports.
The following table describes each of the controls.
Audio Player
Control Definition
Master
This sets the volume level of all the
combined audio sources.
Mute Will mute all the available audio sources.
Line
Sets the volume level for the line-in
source.
Wave
Sets the volume level for playback of
.WAV files (internal files)
Synth
Sets the volume level for the auxiliary
source (synthesizer).
Recording
Sets the recording level for each of the
possible recording sources: line-in,
microphone and CD-ROM.
Mix sets the master volume (as a subset
of the record levels of all the available
recording sources).
Default
Resets all the volume levels back to the
original default values.
Un-Lock/
Lock
Lock will keep the left and right channels
at the same volume level.
Un-Lock allows you to set the left and
right channels to different volume levels.