- 40 -
3.3 System Memory Configuration
The FS56 mainboard has two 184-pin DIMM slots that allow you to install from
64MB up to 2GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommodate
64MB, 128MB, 256MB, 512MB, and 1GB of PC2100/PC2700 /PC3200 com-
pliant 2.5V single (1 Bank) or double (2 Bank) side 64-bit wide data path DDR
SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: Maximum installed memory is 2GB.
N
ote : You do not need to set any jumper to configure memory since
the BIOS utility can detect the system memory automatically.
You can check the total system memory value in the BIOS
Standard CMOS Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new system
memory value will automatically be computed and displayed in the field " Stan-
dard CMOS Setup" of BIOS setup program.
DIMM Socket
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256MB, 512M ,and 1GB
184-pin 2.5V DDR SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256MB, 512M ,and 1GB
184-pin 2.5V DDR SDRAM DIMM
x 1
