- 37 -
IR Header (JP5)
If you have an Infrared device, this mainboard can implement IR transfer
function. This mainboard supports IrDA, ASKIR, or SCR transfer mode. To
enable this function, attach a 6-pin infrared device cable to the IR (JP5)
header. Please note that every pin is properly allocated. If not, your IR device
may be damaged.
Pin Assignments:
1=NC
2=KEY
3=VCC
4=Ground
5=IrTx
6=IrRx
E4
E5
SPDIF In/Out Header (JP7)
Port JP7 can be used to connect special device.
Pin Assignments:
1=SPDIF_IN
2=GND
3=VCC
4=GND
5=VCC
6=SPDIF_OUT
JP7
4 3 2 1
5
6
1
IR Connector
JP5
JP7
1
SPDIF
JP5
6
4
2
5
3
1
