manualshive.com logo in svg

Shuttle FB77, User Manual

Share
Download
Shuttle FB77 User Manual Download Page 7

- 2 -

Back-Panel Connectors

COM1/2 Port Connectors ........................................................................... 28

SPDIF-IN Connector .................................................................................. 28

1394a Port Connector ............................................................................... 28

PS/2 Mouse & PS/2 Keyboard Port Connectors ........................................ 28

LAN Port Connector ................................................................................... 28

USB Port Connectors ................................................................................ 28

SPDIF Out RCA Port Connector ................................................................. 29

Line-In Port Connector ............................................................................... 29

5.1-Channel Center/Bass Port Connector .................................................. 29

5.1-Channel Rear-Out Port Connector ........................................................ 29

5.1-Channel Front-Out Port Connector ....................................................... 29

Clear CMOS button (SW1) ......................................................................... 29

Front-Panel Connectors

HDD LED Connector (HLED) .................................................................... 30

Green LED/Power LED Connector (GLED/PWR LED) .............................. 30

Hardware Reset Connector (RST) .............................................................. 31

ATX Power On/Off Switch Connector (PWON) ........................................... 31

Front Panel Audio/USB/1394 Connector (JP16) ......................................... 32

Internal Peripheral Connectors

Enhanced IDE and Floppy Connectors (IDE1/IDE2 & FDD1) ...................... 33

Serial ATA Connectors (SATA1/SATA2) ..................................................... 33

Other Connectors

ATX Power Supply Connectors (ATX1/ATX2) ............................................. 34

Fan Connectors (FAN1/2/3) ....................................................................... 35

CD_IN Connector (JP11) ........................................................................... 35

IR Header (JP7) ......................................................................................... 36

SPDIF Out  Header (J2) ............................................................................. 36

Wireless KB/MS Header (JP6) .................................................................. 37

Extended Parallel Port Header (JP8) ......................................................... 37

LINE_IN Connector (JP12) ......................................................................... 38

Summary of Contents for FB77



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands