manualshive.com logo in svg

Shuttle FB77, User Manual

Share
Download
Shuttle FB77 User Manual Download Page 28

- 23 -

Step 13

Install Drivers & Software Components

Please note that all the system utilities and drivers are designed for Win 9x/
2000/ME/NT/XP operating systems. Make sure your operating system is
already installed before running the installation programs on CD-ROM.

1. Insert the FB77 bundled CD-ROM into your CD-ROM drive. The

autorun program will display the main installation window on screen.

2. Choose "Install Mainboard FB77 Series Driver".
3.   Choose "Install Intel Chipset Driver" and complete it.
4. Choose "Install Realtek Audio Driver" and complete it.
5. Choose "Install Broadcom Giga LAN Driver" and complete it.
6. Choose "Install Broadcom BACS" and complete it.
7. Choose "Install Intel Raid Driver" and complete it.
8. Choose "Install Intel USB 2.0 Driver" and complete it.
9. Choose "Install DirectX9 Utility Driver" and complete it.
10. Quit (from the auto-run installation program).

Summary of Contents for FB77



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands