Shuttle AB60P User Manual Download Page 27

Page: 27 / 81

- 23 -

Step 13

Install Drivers & Software Components

Please note that all the system utilities and drivers are designed for Win 9x
/2000/ME/XP/NT operating systems only. Make sure your operating system is
already installed before running the drivers installation CD-ROM programs.

1. Insert the AB60P bundled CD-ROM into your CD-ROM drive.

The autorun program will display the drivers main installation window
on screen.

2. Select the "Install Mainboard Software" bar to run into sub-menu.

3. Choose "Install Intel Chipset Driver" and complete it.

4. Choose "Install Intel USB 2.0 Driver" and complete it.

5. Choose "Install Realtek Audio Driver" and complete it.

6. Choose "Install Realtek LAN Driver" and complete it.

7. Select the "Install Utility" bar to run into sub-menu.

8. Choose "Install Acrobat Reader" and complete it.

9. Choose "Install WinFlash Utility" and complete it.

10. Return to the main installation window and exit from the auto-run

drivers installation program.

]

Please refer to section Chapter 4 Software Utility to install driver.

Summary of Contents for AB60P


















































































Search results

Summary of Contents for AB60P

Reviews:

Related manuals for AB60P

Brands by name

Popular brands

Shuttle AB60P, User Manual

Search results

Summary of Contents for AB60P

Reviews:

Related manuals for AB60P

Brands by name

Popular brands