- 9 -
Ø
1 X Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø
1 X PS/2 mouse connector.
Ø
1 X PS/2 Keyboard connector.
Ø
4 X USB ports.
Ø
2 X DB9 Serial connectors 16550 UART compatible.
Ø
1 X DB25 Parallel port supports Standard Parallel Port and
Bi-directional (SPP), Enhanced Parallel Port (EPP), and Extended
Capabilities Port (ECP) data transmission schemes.
Ø
1 X Line-Out port.
Ø
1 X Line-In port.
Ø
1 X Mic-In port.
Ø
1 XLAN port.
-
PCI Bus Master IDE Controller Onboard
Two Ultra DMA 100/66 Bus Master Dual-channel IDE ports provide sup-
port to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements data transfer speeds of up to 100/66 MB/sec
and also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
-
ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
The ATX power include other 4-pin +12V ATX power connector.
-
System BIOS
Provides licensed Award BIOS V6.0 PG on Intel Firmware Hub 2Mb Flash
core and supports Green PC, Desktop Management Interface (DMI).
-
ATX Form Factor
System board conforms to ATX specification.
Board dimension: 305mm X 195mm.
