- 34 -
E1
Other Connectors
ATX Power Supply Connector (ATX1)
This motherboard uses 20-pin Pentium 4 standard ATX power header,
CN7 and comes with another two headers.
Please make sure you plug in the right direction.
Note 1:
Note 1:
Note 1:
Note 1:
Note 1:
The ATX power connector is directional and will not go in unless the guides
match perfectly making sure that pin#1 is properly positioned.
Note 2:
Note 2:
Note 2:
Note 2:
Note 2:
Make sure the latch of the ATX power connector clicks into place to ensure a
solid attachment.
Note 3:
Note 3:
Note 3:
Note 3:
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power and
at least 720mA compatible.
Note 4:
Note 4:
Note 4:
Note 4:
Note 4:
Make sure your power supply have enough power for higher speed processor
installed.
ATX1
ATX 1
