- 31 -
C1
Front-Panel Connectors
Panel Connector (PANEL1)
The front panel connectore (PANEL1) provides a standard set of switch and
LED connectors commonly found on ATX or micro-ATX cases. Refer to the
table below for information.
PANEL 1
PANEL 1
PANEL 1
PANEL 1
PANEL 1
1. HD_LED_P (Hard disk LED pull up to +5V)
2. FP PWR/SLP (MSG LED pull up to +5V)
3. HD_LED_N (Hard disk active LED)
4. GND (Ground)
5. RST_SW_N (Reset Switch low reference pull down to GND)
6. PWR_SW_P (Power Switch high reference pull up to +5V)
7. RST_SW_P (Reset Switch high reference pull up to +5V)
8. PWR_SW_N (Power Switch high reference pull down to GND)
9. RSVD (Reserved)
10. NC (No pin)
1
HD_LED_P
HD_LED_N
RST_SW_N
RST_SW_P
NC
PWR_SW_N
PWR_SW_P
GND
FP PWR/SLP
RSVD
PANEL 1
PANEL 1
1
HD_LED_P
HD_LED_N
RST_SW_N
RST_SW_P
NC
PWR_SW_N
PWR_SW_P
GND
FP PWR/SLP
RSVD
1
3
5
7
9
2
4
6
8
10
