Shuttle AB45 User Manual Download Page 73

Page: 73 / 81

- 71 -

HDD Power Down

When this item enabled and after the set up time of system inactiv-
ity, the hard disk drive will be powered down while all other de-
vices remain active.

The choice: Disabled or 1 Min~15 Min.

Soft-Off by PWR-BTTN

Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has "hung.".

The choice: Instant-Off or Delay 4 Sec.

Wake-Up by PCI card

This item Enabled/Disabled PCI card wakeup for PCI Spec 2.2.

The choice: Enabled or Disabled.

Power On by Ring

This item determine the system will resume by activating of modem
ring.

The choice: Enabled or Disabled.

Wake Up On LAN

This item Enabled/Disabled LAN wakeup .

The choice: Enabled or Disabled.

USB KB Wake-Up Fram S3

Set the item Enabled, users can awaken the system by USB key-
board.
When ACPI Suspend Type item select is S1(POS), then this item can not
show up.

The choice: Disabled or Enabled.

Resume by Alarm

When this item enabled, you can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend mode.

The choice: Disabled or Enabled.

Data (of Month) Alarm

This item selects the alarm date.

Key in a DEC number:Min=0, Max=31.

Summary of Contents for AB45


















































































Search results

Summary of Contents for AB45

Reviews:

Related manuals for AB45

Brands by name

Popular brands

Shuttle AB45, User Manual

Search results

Summary of Contents for AB45

Reviews:

Related manuals for AB45

Brands by name

Popular brands