- 38 -
CPU, AGP, Chipset and Chassis Fan connectors - FAN1/2/3
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), AGP (FAN2), Chassis (FAN3) cooling fans.
Note:
Note:
Note:
Note:
Note:
Both cable wiring and type of plug may vary ,
which depends on the fan maker. Keep in mind
that the red wire should always be connected
to the +12V header and the black wire to the
ground (GND) header.
Wake-On-LAN Connector (JP6)
Attach a 3-pin connector through the LAN card which supports the Wake-
On-LAN (JP6) function. This function lets users wake up the connected sys-
tem through the LAN card.
Pins Assignment:
1=Power
2=GND
3=RING#
E2
E3
FAN1/2/3 with rotate sense.
SENSE
GND
+12V
1
FAN1
1
FAN2
1
FAN3
1
JP6
WOL
3 2
