manualshive.com logo in svg

Shure UHF WIRELESS microphone system, User Manual

Share
Download
Shure UHF WIRELESS microphone system User Manual Download Page 23

ENGLISH

22

Connecting a Lavalier Microphone or Instrument Cable to the U1

Transmitter (Figure 36)

1. Plug the microphone cable or instrument cable into the transmitter input connector.
2. Attach the lavalier microphone to your tie, shirt, or collar. If using a headset, put

the headset on.

3. If using an instrument adapter cable, attach the other end of cable to the instru-

ment output connector.

MICROPHONE CABLE OR

INSTRUMENT ADAPTER

CABLE

FIGURE 36

PROGRAMMING THE TRANSMITTER

The Group/Channel setting on the U1 and U2 transmitter display can be pro-

grammed to meet the requirements of a particular installation. You can also lock the

display and the power on function to prevent accidental changes. The following para-

graphs present instructions for programming the transmitters.

Changing Transmitter Group/Channel Settings

1. Turn the transmitter on by sliding the transmitter power ON/OFF switch to the ON

position. The existing Group and Channel settings automatically display.

2. Open the battery compartment. This will expose the MODE (left) and SET (right)

buttons, as well as the GAIN control and the batteries, as shown in Figure 37.

FIGURE 37

Summary of Contents for UHF WIRELESS microphone system





































Reviews:

No comments

Brands by name

Popular brands

Load more brands