⑨ Cascade RF B Connector
Connect to second frequency manager's antenna inputs, or connect a sixth receiver.
Note:
Do not use other RF outputs to connect to a second frequency manager.
⑩ RF B Connectors
Connect to receiver's antenna B input.
⑪ RF A Connectors
Connect to receiver's antenna A input.
⑫ Cascade RF A Connector
Connect to second frequency manager's antenna inputs, or connect a sixth receiver.
Note:
Do not use other RF outputs to connect to a second frequency manager.
⑬ RF Input Antenna A
Use reverse SMA cables to connect antenna.
Hardware Connections
1. Connect each antenna to the
antenna A
and
antenna B
outputs on the frequency manager's rear panel.
2. If mounting in equipment rack, use included rackmount hardware to mount as shown.
3. Connect power supply to power outlet and to the
power in
on the frequency manager.
4. Power each receiver by connecting a DC power cable between the frequency manager's
power out
and the receiver's
power
input.
5. Use reverse SMA cables to connect the frequency manager's
RF A
and
RF B
ports to each receiver's
antenna A
and
antenna B
inputs.
Note:
If mounting antennas remotely, see Remote Antenna Placement.
Shure Incorporated
UA846Z2
Frequency Manager
3/7
2017/06/09
