background image

Housing

Cast Aluminum, black painted finish

Dimensions

67 x 32 x 112 mm (H x W x D) Dimensions with Stand: 108 x 32 x 112 mm

Net Weight

0.28 kg (9.8 oz.)

Without Mounting Stand

0.42 kg (14.8 oz.)

With Mounting Stand

Certifications

This product meets the Essential Requirements of all relevant European di-
rectives and is eligible for CE marking.

Shure Incorporated

UA834

 In-Line Antenna Amplifier

4/4

Summary of Contents for UA834WB

Page 1: ...line amplifier or at the input to the receiver An overload at either point degrades the signal When there is an RF overload indicator on the inline amplifier the amplifier might not be necessary or it should be placed further down the cable run at a midpoint between the antenna and receiver The gain switch only affects output gain and cannot compensate for input overload at the amplifier If there ...

Page 2: ...grade cable as shown Cable Maintenance To maintain top performance for antenna cables Avoid sharp bends or kinks in the cables Do not deform cables with makeshift clamps such as bending a nail over the cable Do not use in permanent outdoor installations Do not expose to extreme moisture Selecting Antenna Cables Use 50 ohm low loss coaxial cable such as RG 8U Shure offers pre terminated antenna cab...

Page 3: ...ence and ambient RF noise It cannot selectively increase the signal from the transmitter Use the lowest gain setting necessary to achieve good reception of the transmitter RF signal as indicated on the receiver s RF LED or meter Only increase the gain setting to compensate for the calculated cable loss The resulting signal level at the receiver cable loss plus amplification should be within 5 dB o...

Page 4: ...th Stand 108 x 32 x 112 mm Net Weight 0 28 kg 9 8 oz Without Mounting Stand 0 42 kg 14 8 oz With Mounting Stand Certifications This product meets the Essential Requirements of all relevant European di rectives and is eligible for CE marking Shure Incorporated UA834 In Line Antenna Amplifier 4 4 ...

Reviews: