Shure Incorporated
8/15
LINKING AN SCM800/E TO OTHER AUTOMATIC MIXERS
FIGURE 7
USING AN SCM800 AS A SUBMIXER
The master output of the SCM800 (or the output of a mixer in a group of linked SCM800 mixers) can be connected
to a channel input or the aux input of an automatic mixer, or other types of mixers. See Figure 8.
USING AN SCM800/E AS A SUBMIXER
FIGURE 8
ADDITIONAL LINK CABLES
Additional 381 mm (15 in.) link cables are available as Shure Part No. 95A8889. Longer cables in a variety of
lengths are available from Apple Computer as computer printer connections; they are variously referred to by Ap
ple as “shielded serial cable with two mini DIN8 connectors,” and “Apple System Peripheral–8 Cable.”
BASIC MIXER OPERATION
1. Turn on the Power switch.
2. Adjust each channel level so that its Overload LED flickers only during very loud speech or noise.
3. Turn unused channel controls full counterclockwise.
4. Adjust the Low-Cut and High-Frequency controls adjacent to each Input Gain control until all microphones
sound alike.
5. Adjust the SCM800 Master level control for the desired output level, as indicated by the output peak meter.
6. Adjust the headphones volume level with the PHONES control knob.