![background image](http://html1.mh-extra.com/html/shure/sbc240/sbc240_user-manual_1261214004.webp)
Shure Incorporated
4/14
•
•
•
•
•
•
•
•
•
•
•
Caution: risk of danger (See note.)
Direct current
Alternating current
On (Supply)
Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION
Stand-by
Equipment should not be disposed of in the normal waste stream
WARNING:
Voltages in this equipment are hazardous to life. No userserviceable parts inside. Refer all servicing to qualified service personnel. The safety cer
tifications do not apply when the operating voltage is changed from the factory setting.
WARNING
Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat
above 140°F (60°C), or incinerate.
Follow instructions from manufacturer
Only use Shure charger to recharge Shure rechargeable batteries
WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.
Never put batteries in mouth. If swallowed, contact your physician or local poison control center
Do not short circuit; may cause burns or catch fire
Do not charge or use battery packs other than Shure rechargeable batteries
Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
Caution:
Do not transport chargers with batteries inserted.
Warning:
Do not charge batteries in enclosed spaces without proper ventilation.
Please follow your regional recycling scheme for batteries, packaging, and electronic waste.
Note:
Model information and power ratings are labeled on the bottom of the unit.
General Description
The SBC240 networked docking charger provides a compact charging and storage solution for any combination of 2 SB910/
SB920 batteries or ADX1, ADX2, or ADX2FD transmitters using Shure rechargeable batteries. The charger is network-enabled
to allow for remote monitoring of charger and battery parameters using Shure Wireless Workbench software. Connect up to 4
SBC240 chargers together to share power and network connectivity.
Features
Charging for any combination of up to 2 SB910/SB920 batteries or ADX1, ADX2, or ADX2FD transmitters using Shure
rechargeable batteries
Connect up to 4 chargers together to share power and network connections and save space
®