Shure Incorporated
8/20
1.
2.
3.
4.
◦
◦
5.
6.
7.
8.
9.
10.
Receiver Controls and Connectors
Front Panel
audio
LED: Indicates strength of incoming audio signal: green for normal, amber for strong and red for clipping.
LED Screen: Displays group and channel setting. See "Single System Setup" for details.
channel
button: Changes group and channel setting. See "Single System Setup" for details.
ready
LED: Indicates system ready and receiving an RF signal from the transmitter. Also indicates battery level of the
transmitter:
Green = transmitter battery level normal
Red = low battery (typically less than 60 minutes with alkaline batteries)
with NiMH rechargeable batteries, when the indicator turns red there will be little to no remaining life.
Infrared (IR) port: Sends IR signal to transmitter for sync.
sync
button: Press to synchronize transmitter with receiver group and channel settings.
AC adapter jack
Adapter cord tie-off
XLR microphone output jack
6.35 mm (¼") instrument level output jack
Back Panel