7
MONO, STEREO AND MIXMODE CONTROL
The bodypack provides simple configuration of a monitor mix and enables the user to customize
an individual mix in a multiple mix environment. Three monitoring modes are available - mono,
stereo, and MixMode.
Mono:
The bodypack receives one signal from the mixer and sends that signal to both earphones.
For mono signals, use MixMode (MIX ON).
Stereo:
The bodypack receives two signals (L and R) from the mixer and sends the signals to the
left and right earphones, respectively. The balance knob adjusts the balance between the left and
right earphones. For stereo signals, use the MIX OFF setting.
MixMode:
Allows the performer to easily adjust the monitor mix
during
the performance. In Mix-
Mode, the bodypack receives two signals, such as a band mix and a vocal mix. The balance knob
adjusts the mix of these two signals. The mixed signal is sent to
both
the left and right earphones.
For example, if the band is overpowering the vocals in the mix, the vocal levels can be increased
and the band mix level decreased by simply adjusting the balance knob.
USING MIXMODE
1/L
2/R
1/L
2/R
1/L
2/R
1/L + 2/R
Signal From
Audio Source
Signal From
Audio Source
STEREO
MIXMODE
MIXED
Step Four:
The user may continue to
adjust the mix using the balbance knob
throughout the performance.
MIXMODE channel 1
MIXMODE channel 2
MID-POINT
CLOCKWISE
COUNTERCLOCKWISE
Step Two:
Using the balance knob,
the user blends the two signals until
the correct mix is achieved.
Step One:
The bodypack
receives TWO signals
from the audio source.
Step Three:
The bodypack sends the
mixed signal to both channels of the
earphones.
