STYLUS REMOVAL AND REPLACEMENT
Replace the stylus as shown above. Always hold
the stylus only by the plastic grip, take care not to
touch or damage the diamond tip or cantilever. Do
not force.
Use soft brush with alcohol or an alcohol-distilled
water solution. Brush only from back to front as
shown. commercial cleaning solutions may
cause stylus damage.
TO PRESERVE STYLUS LIFE
1.
Make certain cartridge is correctly mounted in tone arm and stylus is properly inserted in
cartridge.
2.
Protect stylus with stylus guard when dusting turntable.
3.
Regulate tone arm set–down to prevent stylus from striking edge of turntable or record.
4.
Do not handle tone arm while record is being played. Use cuing device if possible.
5.
If manual set-down is necessary, release arm as soon as stylus engages groove.
6.
Do not activate arm without record on turntable.
7.
Do not use damaged records.
8.
Check tracking force and anti-skating adjustments periodically
USE ONLY SHURE REPLACEMENT STYLI
A Shure replacement stylus will restore your Shure cartridge to its originally specified performance level.
We strongly advise against the use of non-Shure styli with our cartridges. Such imitations will not perform
as well as a stylus designed specifically for your Shure cartridge. Such imitations may also cause permanent
damage to your records – severe mistracking can ruin a record in a single play.
PRODUCT SPECIFICATIONS
Stylus Tip:
S
Polished, natural diamond
S
Spherical 18
µ
(0.0007 in.) radius
Channel Balance:
Within 2 dB
Channel Separation:
20 dB at 1 kHz
Stylus
Stylus
Grip Color
Stereo Output (1
kHz
at 5 cm/sec peak
recorded velocity)
Frequency
Response
Channel
Separation
Recommended
tracking force
(in grams)
Max.
Min.
N44–7
White
9.5 mV
20 to 20,000 Hz
20 dB at 1 kHz
1.5 g
3 g
N44G
Gray
6.2 mV
20 to 20,000 Hz
20 dB at 1 kHz
0.75 g
1.5 g
PATENT NOTICE: Manufactured under one or more of the following U.S. Patents: 4,275,888; 4,441,177;
4,473,897; 4,489,442.
WARRANTY
Shure Incorporated (”Shure”), 222 Hartrey Avenue, Evanston, lllinois 60202–3696, warrants to the owner
of this product that it will be free in normal use, of any defects in workmanship and materials for a period of
one year from date of purchase. You should retain proof of date of purchase. Shure is not liable for any conse-
quential damages. If this Shure product has any defects as described above, carefully repack the unit, have
it insured, and return it prepaid to: Shure Incorporated, Attention:Service Department, 222 Hartrey Avenue,
Evanston, lllinois 60202 – 3696. If you are not in the United States, return the unit to your dealer or Authorized
Service Center for repair. The unit will be repaired or replaced and returned to you promptly, and if it cannot
be repaired or replaced, you may elect to receive a refund. This warranty does not include stylus wear.
Models N44-7, N44G
Replacement Styli
27A3069 (AH)
2001, Shure Incorporated
Printed in Mexico
Summary of Contents for N44-7
Page 4: ......
