Shure N35S, Removal And Replacement Manual

Page: 1 / 4

Copyright 2000, Shure Incorporated
27A3072 (TB)
Printed in U.S.A.
Stylus removal and replacement
Remove
Replace
Remove and replace the stylus as shown above.
Always hold the stylus by the plastic grip. Do not
touch or damage the diamond tip or cantilever. Do
not force.
Stylus Cleaning
Use a soft brush with alcohol or an alcohol-distilled
water solution. Commercial cleaning solutions
may cause stylus damage. Brush only from back
to front as shown here, never fromt to back or side
to side.
TO PRESERVE STYLUS LIFE
1. Mount your cartridge correctly in the tonearm and insert the stylus correctly into the cartridge.
2. Align your cartidge using the overhang tool supplied with your turntable or using an alignment protractor.
Set tracking force according to the table below.
3. Protect the stylus by carefully lowering the stylus guard when cleaning or dusting your turntable.
4. For automatic turntables, adjust the set–down position to prevent the stylus from striking the edge of the
record or turntable platter.
5. Use your tonearm’s cuing device and avoid handling tonearm.
6. With manual cuing, grasp tonearm lightly and release as soon as stylus makes contact with the record.
7. Periodically check and adjust all tonearm settings. Use the Shure SFG-2 tracking force gauge for accu-
rately setting tracking force.
USE ONLY SHURE REPLACEMENT STYLI
This Shure replacement stylus will restore your Shure cartridge to its original specifications and performance
level. Non–Shure styli are not recommended because they will compromise the performance of your cartridge,
cause mistracking and damage your records.
PRODUCT SPECIFICATIONS
Polished, natural diamont stylus tip
Spherical radius: 18
µ
(0.0007 in.)
Channel balance within 2 dB
Channel separation: 20 dB at 1 kHz
Stylus Stylus Color Stereo Output (1
KHz at 5 cm/sec
peak recorded
velocity)
Frequency
Response in
Hz
Tracking
force range
(grams)
Typical
Tracking
Force (grams)
N35S Fluorescent
Yellow
5.0 mV 20 to 20,000 3–5 4
N70BX Beige 5.0 mV 20 to 18,000 1.5–3 2
SS35S Light Blue 5.0 mV 20 to 20,000 4–5 4.5
PATENT NOTICE: Manufactured under one or more of the following U.S. Patents: 4,275,888; 4,441,177;
4,489,442.
WARRANTY
Shure Incorporated (”Shure”), 222 Hartrey Ave-
nue, Evanston, Illinois 60202–3696, warrants to
the owner of this product that it will be free in nor-
mal use of any defects in workmanship and materi-
als for a period of one year from date of purchase.
You should retain proof of date of purchase. Shure
is not liable for any consequential damages. If this
Shure product has any defects as described above, carefully repack it and send it prepaid to: Shure In-
corporated, Attention: Service Department, 222 Hartrey
Avenue, Evanston, Illinois 60202–3696. Outside the
United States, return the product to your dealer or Autho-
rized Service Center for repair. The product will be repaired
or replaced and returned to you promptly. If it cannot be re-
paired or replaced, you may elect to receive a refund. This
warranty does not include stylus wear.
Models N35S, SS35C, N70BX
Replacement Styli